Home / Blog

Daily walkaround checks: what DVSA expects, and how to stop doing them on paper

Every operator knows the daily walkaround check matters. Fewer can put their hand on last month’s checks for one particular van when someone asks. Paper sheets get wet, go missing in cabs and get filled in from memory at the end of the week. When a defect is written on one, it can sit in a door pocket for days before anyone in the office sees it.

This post covers what a good check looks like, what DVSA expects, and how to make it easier.

What a walkaround check is for

A walkaround check is the driver’s look over the vehicle before it goes out: lights, tyres, wheel nuts, mirrors, windscreen, wipers, brakes, the load and its security, fluid leaks, warning lights and so on. The driver is responsible for the roadworthiness of the vehicle they drive, and the operator is responsible for having a system that finds and fixes defects.

DVSA’s Guide to maintaining roadworthiness sets out what it expects from operators, and DVSA’s walkaround check guides for drivers show what to look at. In short, DVSA expects:

  • a check by the driver before the vehicle is used each day;
  • defects reported in writing (paper or electronic) and passed to someone who can act on them;
  • a record that each defect was put right, or that the vehicle was judged safe to use until it is;
  • records kept, so you can show the system works – the guide asks for at least 15 months.

The guide also recommends recording checks where nothing was found (“nil defect” reports), so you can show a check was actually done. It applies to lorries, but the same habits make sense for vans: a van with a bald tyre is just as dangerous.

Where paper lets you down

  • Slow defects. The office only hears about a defect when the sheet comes back.
  • No proof. A ticked sheet doesn’t show when, or if, the vehicle was looked at.
  • Missing records. Finding 15 months of sheets for one vehicle is a job in itself.
  • The same item, every time. Nobody spots that the same light has been reported three weeks running.

Moving checks to the phone

The fix isn’t complicated. Drivers already carry a phone, so the check can live there. In OneBx Fleet, it works like this:

  1. Scan the sticker. Each vehicle has a QR sticker. The driver scans it, so the check is always against the right vehicle – including a spare or a hire van.
  2. Work through your list. The check list is your own, set per type of vehicle (a 7.5-tonne lorry, a van and a forklift don’t need the same list).
  3. Report a defect with a photo. Each item has its own choices, so a driver can say whether the vehicle is still safe to drive or must stay off the road.
  4. The office sees it straight away. Defects land on a board, get booked in with your garage or fitter, and are signed off when fixed. The garage can have its own sign-in to see and close repairs.
  5. Records keep themselves. Every check, nil-defect or not, is stored with who did it and when, ready for a DVSA report.

The same place keeps your MOTs, safety inspections, tax, insurance, licence checks and tachograph downloads, with reminders before they’re due. So the whole compliance picture sits in one place instead of a cabinet and a calendar.

Five tips, whatever you use

  1. Keep the list short. A check that takes 20 minutes gets skipped; aim for the items that really matter for each vehicle type.
  2. Make “safe to drive?” a clear choice. Drivers shouldn’t have to guess whether a defect means the vehicle stays in the yard.
  3. Close the loop. Tell the driver when their defect is fixed – people report more when they see something happen.
  4. Look at missed checks weekly. A missed check is easier to sort out on Monday than at a DVSA visit.
  5. Watch for repeats. The same defect three times is a maintenance problem, not a driver problem.

This post is general guidance, not legal advice – DVSA’s own guides are the place to check exactly what applies to your vehicles and licence.